BMW Hands-Free Driving Module – TJA / ACC PRO Touch-Free Steering Wheel Emulator (5AU / 5AT)

Description

BMW Hands-Free Driving Module (HOD/TJA Emulator) enables hands-free driving during Traffic Jam Assist and ACC PRO by emulating steering wheel touch detection. No need to replace your steering wheel. Plug-and-play module with coding activation included. Compatible with BMW F-Series and G-Series equipped with 5AU/5AT driving assistance. $299 USD at M-TRI UPGRADE.

What This Module Does

BMW vehicles with ACC PRO / Driving Assistant Professional (5AU/5AT) require you to keep your hands on the steering wheel at all times. The capacitive sensors in the steering wheel detect hand contact — if you let go, the system warns you with yellow then red lights and eventually disengages lane keeping and applies the brakes.

The HOD (Hands-Off Detection) emulator module simulates constant steering wheel contact. This allows you to use Traffic Jam Assist (TJA) truly hands-free in traffic at speeds under 60 km/h, and reduces the frequency of “hold steering wheel” warnings during highway ACC PRO use.

Key Features

• Hands-free Traffic Jam Assist (TJA) — no more touching the steering wheel every 15 seconds in traffic
• Reduced ACC PRO warnings — fewer “please hold steering wheel” prompts during highway driving
• No steering wheel replacement needed — works with your existing steering wheel
• Plug-and-play hardware — connects to the vehicle’s CAN bus
• Coding activation included — remote coding session to configure the module
• Fully reversible — unplug the module to return to factory behavior

Compatible BMW Models

Works on all BMW F-Series and G-Series models equipped with Driving Assistant Professional (5AU) or Enhanced Driving Assistant (5AT):

G-Series

F-Series (with ACC + KAFAS)

Requirements

• Your BMW must have ACC (Adaptive Cruise Control) and KAFAS camera module
• Steering wheel must have ACC buttons (distance and speed controls)
• Vehicle must have EPS (Electric Power Steering)
• Not compatible with vehicles that have Active Steering (S217)

What’s Included

• HOD/TJA emulator module
• Wiring harness with OEM connectors
• Installation guide
• Remote coding activation session (required for the module to function)

Installation

The module installs behind the steering column shroud. It connects to the vehicle’s CAN bus via a dedicated harness. Installation takes approximately 20-30 minutes. After physical installation, a remote coding session is required to activate the module — this is included in the price.

Important Safety Notice

This module is intended for use in low-speed traffic situations (Traffic Jam Assist, under 60 km/h) where the vehicle ahead is clearly detected. The driver remains responsible for vehicle control at all times. Use at your own risk. Always be prepared to take over steering immediately. This product is for off-road / track use in some jurisdictions — check your local regulations.

Related Products

• Hidden Features G-Series — $229 (12+ features)
• Comfort Coding Package — $179 (4 features)
• Smart Comfort Module — $229

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “How does the BMW Hands-Free Driving (TJA) module work?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The BMW TJA (Traffic Jam Assist) hands-free module adds a physical button to your steering wheel that activates lane-centring without requiring hands on the wheel in certain driving modes. No coding required u2014 plug-and-play.”
}
},
{
“@type”: “Question”,
“name”: “Which BMW models are compatible with the TJA hands-free module?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The BMW TJA/ACC PRO hands-free module is compatible with G-Series BMWs equipped with the ACC (Adaptive Cruise Control) system u2014 including G20, G30, G05, G06, G07, G80, G82 and more.”
}
},
{
“@type”: “Question”,
“name”: “Does the TJA hands-free module require coding?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The module itself is plug-and-play. Some models may require a small coding adjustment to enable the steering hold function u2014 we confirm compatibility with your VIN before shipping.”
}
}
]
}