M-TRI UPGRADE
BMW Exhaust Enhancement Package - Burble Tune + GPF Delete + O2 Fix
BMW Exhaust Enhancement Package - Burble Tune + GPF Delete + O2 Fix
Couldn't load pickup availability
Quick Answer
The BMW Exhaust Enhancement Package combines two remote ENET services: a Stage 1 exhaust burble tune that adds crackle and pop on overrun, and GPF/OPF delete coding that suppresses particulate filter regeneration cycles. Both are applied in one session via TeamViewer. Compatible with B58 and N55 engines on F and G-series BMWs.
BMW Exhaust Enhancement Package — burble/pop tune + GPF/OPF delete + O2 sensor fault suppression + exhaust valve optimization in one remote session. $299 USD. Deeper exhaust tone, crisp overrun pops, no check engine light after downpipe or GPF removal. B58, S58, S55, B48, S63 engines. M-TRI UPGRADE, WhatsApp +6421920905.
Want your BMW to sound the way it should?
- You removed the GPF/OPF and the exhaust sounds better but you have a permanent engine light?
- You installed a downpipe and the O2 sensor is throwing codes?
- You want more overrun pops and crackle but the factory tune is too conservative?
- You want to do the GPF delete, O2 fix, and exhaust tune all at once instead of three separate sessions?
BMW Exhaust Enhancement Package
Everything exhaust-related in one session. Burble tune, GPF delete, O2 sensor fix, and exhaust valve optimization.
What Is Included
| Service | What It Does | Individual Price |
|---|---|---|
| TU Exhaust Burble/Pop Tune | Enhanced overrun pops, crackle on deceleration, deeper tone in Sport/Sport+ | $149 |
| GPF/OPF Delete | Disable GPF monitoring and regeneration cycles | $209 |
| O2 Sensor Fault Fix | Suppress front O2 sensor fault codes after downpipe install | $99 |
| Exhaust Valve Optimization | Optimize exhaust valve logic for better sound at all RPM ranges | $79 |
Individual total: $536
Package price: $299 — save $237 (44% off)
Supported Engines
- B58 — 340i, M340i, 440i, X3/X4/X5 40i, Z4 M40i, Supra
- S58 — G80 M3, G82 M4, G87 M2, X3M, X4M
- S55 — F80 M3, F82 M4, F87 M2 Competition
- B48 — 320i, 330i, X1/X3 20i
- S63 — F90 M5, X5M, X6M
Note: Off-road and track use only for GPF delete. Check local regulations.
Related Products
- Exhaust Valve Controller Module — $459 (hardware app control)
- GPF/OPF Delete (standalone) — $209
Package vs Individual Services
| If Purchased Separately | Price |
|---|---|
| Burble / crackle tune | ~$199 |
| GPF/OPF delete coding | $209 |
| O2 sensor fault suppression | ~$99 |
| Exhaust valve optimization | ~$99 |
| Total if separate | ~$606 |
| Exhaust Enhancement Package | $299 (save 50%) |
Best Results With
- Aftermarket downpipe or decat — removes the physical restriction for maximum sound
- Aftermarket exhaust — louder base volume makes pops more dramatic
- Stock exhaust — still improves sound, just more subtle
Related Guides
Share
Frequently Asked Questions
How does remote coding work?
After purchase we schedule a remote session. Connect an ENET cable to your BMW's OBD2 port, open TeamViewer, and we handle the rest — coding is complete in 15–60 minutes.
Is the coding reversible?
Yes — 100% reversible. We back up your original settings before any changes. You can restore to factory at any time.
Which BMW models are supported?
Most services support F-Series and G-Series BMWs. Exact compatibility is listed in each product. Contact us if unsure about your model.
What do I need?
You need: (1) an ENET OBD2-to-Ethernet cable, (2) a Windows laptop, (3) TeamViewer (free). We supply all coding software and guide you step-by-step.
How long does a session take?
Single features take 15–30 minutes. Full packages take up to 2 hours. Sessions run 7 days a week across NZ, AU, USA and Middle East time zones.