BMW GPF / OPF Delete Coding – Remote Service

Description

BMW GPF/OPF Delete Coding removes the gasoline particulate filter regeneration cycle via remote coding. Eliminates forced regeneration, reduces exhaust back pressure after GPF hardware removal. For B58, S58, N63, S63 engines. Remote 15-minute session. $209 USD at M-TRI UPGRADE.

Does any of this sound familiar?

• Your BMW gasoline particulate filter (GPF/OPF) restricts exhaust flow and you have already installed a downpipe or test pipe?
• You are getting GPF-related fault codes or reduced performance warnings after a hardware modification?
• You want to eliminate the GPF regeneration cycles that cause hesitation and uneven power delivery?

BMW GPF / OPF Delete Coding

Remote software coding to disable the gasoline particulate filter (GPF/OPF) monitoring and regeneration logic in your BMW DME. Eliminates fault codes and restores smooth power delivery after physical GPF removal.

What You Get

• GPF/OPF monitoring disabled — no more regeneration cycles or related fault codes
• Smooth power delivery — eliminates the hesitation caused by forced regeneration
• CEL-free operation — no check-engine lights related to GPF sensors
• Compatible with aftermarket downpipes

Supported Engines

• B58 (all variants)
• S58
• S55 (late production with GPF)
• B48
• S63 (G-Series)

How It Works

1. Place your order and provide your VIN
2. Connect via ENET cable
3. Remote session — completed in 30-45 minutes
4. Clear codes and drive

Note: This service is intended for off-road and track use only. Please check local regulations before ordering.

Supported Engines and Models

Important: This service is intended for off-road, track, and competition use only. Please verify your local regulations before ordering.

Learn More

• Read our complete GPF/OPF Delete guide
• BMW GTS/CS Performance Flash Guide

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What does BMW GPF/OPF Delete coding do?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “BMW GPF/OPF delete coding disables the ECU monitoring of the petrol particulate filter u2014 preventing fault codes, limp mode, and warning lights that appear after aftermarket downpipe or GPF removal.”
}
},
{
“@type”: “Question”,
“name”: “Which BMW models need GPF/OPF delete coding?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “BMW B48, B58, S55, and S58 engines from 2018+ with a GPF/OPF filter require coding after downpipe installation. Compatible models include F30 LCI, G20, G80 M3, G82 M4, and more.”
}
},
{
“@type”: “Question”,
“name”: “Is BMW GPF delete coding reversible?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. GPF coding is fully reversible. We can restore the original factory monitoring settings in a follow-up session if needed.”
}
},
{
“@type”: “Question”,
“name”: “Will BMW GPF delete coding fail an emissions test?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The physical GPF filter remains in place u2014 only the ECU monitoring is disabled. Standard emissions tests that check hardware should not be affected. Consult local regulations.”
}
}
]
}