Description
The BMW EKPM3 is the Electric Fuel Pump Control Module that regulates in-tank fuel pump speed via PWM signal. Failure symptoms include long cranking, intermittent stalling, and fault codes 2FBA or 2FBB. The replacement module is plug-and…
Quick Answer
The BMW EKPM3 is the Electric Fuel Pump Control Module that regulates in-tank fuel pump speed via PWM signal. Failure symptoms include long cranking, intermittent stalling, and fault codes 2FBA or 2FBB. The replacement module is plug-and-play using the factory connector harness — no coding required. Self-adapts to the vehicle within one drive cycle. Compatible with N20, N55, and B58 engines.
BMW EKPM3 Fuel Pump Control Module — direct plug-and-play replacement for 3, 5, 7 Series and X models. Solves fuel pump failure, long cranking, and no-start conditions caused by faulty EKPM module. Pre-programmed, no coding needed. M-TRI UPGRADE, worldwide shipping.
Does any of this sound familiar?
- Your BMW stalls out of nowhere while driving — engine just cuts and restarts, or doesn’t.
- Your dealer quoted you $400–$600 to diagnose and replace a module that costs a fraction of that.
- You get intermittent “fuel pump” fault codes but the pump itself tests fine — the control module is the real culprit.
- Your F30, F10, or early G30 randomly dies at idle or on the highway, and no one can pin down why.
- You’ve already replaced the fuel pump and the problem came back — because the EKPM3 module was never fixed.
- Your indie shop told you the replacement module needs dealer programming, so you’re stuck waiting on a BMW service appointment.
BMW EKPM3 Fuel Pump Control Module – Plug-and-Play Replacement
A plug-and-play replacement for the BMW EKPM3 (fuel pump / fuel tank control) module that commonly fails on F-chassis and early G-chassis BMWs. Solves the well-known “automatic flameout / stalling while driving” fault without tuning, coding, or dealer-only programming.
What It Fixes
- Automatic flameout / stalling while driving or at idle
- Intermittent fuel-pump power loss
- EKPM3 module internal failure (a common BMW fault code)
Vehicle Fitment
BMW full-series models available – imported German Saibao (Sibao) Auto Parts grade. Confirmed compatibility includes:
- BMW 3 Series (320, 328)
- BMW 5 Series (525, 528, 530, 535, 540)
- BMW 7 Series (740)
- BMW X3 / X4
- BMW X5 / X6
All models supported – please contact customer service with your VIN / frame number to confirm the correct part number before ordering.
Key Features
- No programming required – direct-installation replacement, pre-coded for the factory
- Solves flameout faults – eliminates the EKPM3 stalling issue
- Long warranty – imported-quality parts
- Free shipping, sincere service
Installation
The module is located near the fuel tank. Installation is a direct factory replacement – unplug the faulty unit, plug in the new one. No wire cutting, no coding.
Reviews
There are no reviews yet.