M-TRI UPGRADE
BMW X3 M / X4 M Performance Bundle - CS Flash + 2WD + Anti-Dazzle + ASD (F97/F98)
BMW X3 M / X4 M Performance Bundle - CS Flash + 2WD + Anti-Dazzle + ASD (F97/F98)
Couldn't load pickup availability
Quick Answer
The BMW X3 M / X4 M Performance Bundle combines two remote ENET services: CS DME flash (applying factory CS calibration for maximum output) and 2WD rear-wheel drive mode unlock (disables front axle clutch engagement for track RWD use). Both are delivered in one TeamViewer session. Compatible with F97 X3 M and F98 X4 M. OEM calibration, fully reversible.
BMW X3 M / X4 M Performance Bundle combines CS chassis flash, 2WD conversion, anti-dazzle headlight coding, and ASD configuration for F97 X3M and F98 X4M (2020-2025). Pre-LCI and LCI models supported. Save 40% vs individual pricing. One remote session, 30 minutes. $379 USD at M-TRI UPGRADE.
Get the complete CS driving experience on your X3 M or X4 M
- You want the CS steering feel, suspension response, and transmission behavior without buying the actual CS model?
- You want to unlock rear-wheel drive mode on your xDrive X3 M for track days?
- Your Anti-Dazzle headlights are disabled in the US market and you drive dark roads at night?
- The fake ASD engine sound through the speakers bothers you and you want it gone?
BMW X3 M / X4 M Performance Bundle — F97 / F98
This bundle combines up to four separate coding and flashing services into one remote session. Pick and choose what you want — opt out of any item.
What Is Included
| Service | Pre-LCI | LCI |
|---|---|---|
| CS Flash | Steering + LCI suspension upgrade | Transmission + steering upgrade |
| 2WD Flash | RWD mode conversion | RWD mode conversion |
| Anti-Dazzle | Glare-free high beam | Glare-free high beam |
| ASD | Delete or CS config | Delete or CS config |
Compatibility
- F97 X3 M / X3 M Competition — 2020-2025 (Pre-LCI and LCI)
- F98 X4 M / X4 M Competition — 2020-2025 (Pre-LCI and LCI)
How It Works
- Place your order and provide your VIN
- Tell us which services you want
- Receive booking email, schedule your session
- Connect ENET cable + TeamViewer — ~30 minutes
Learn More
Related Guides
Share
Frequently Asked Questions
How does remote coding work?
After purchase we schedule a remote session. Connect an ENET cable to your BMW's OBD2 port, open TeamViewer, and we handle the rest — coding is complete in 15–60 minutes.
Is the coding reversible?
Yes — 100% reversible. We back up your original settings before any changes. You can restore to factory at any time.
Which BMW models are supported?
Most services support F-Series and G-Series BMWs. Exact compatibility is listed in each product. Contact us if unsure about your model.
What do I need?
You need: (1) an ENET OBD2-to-Ethernet cable, (2) a Windows laptop, (3) TeamViewer (free). We supply all coding software and guide you step-by-step.
How long does a session take?
Single features take 15–30 minutes. Full packages take up to 2 hours. Sessions run 7 days a week across NZ, AU, USA and Middle East time zones.