M-TRI UPGRADE
BMW NBT Evo iDrive 4 to iDrive 6 Update with Full Screen CarPlay
BMW NBT Evo iDrive 4 to iDrive 6 Update with Full Screen CarPlay
Couldn't load pickup availability
Quick Answer
BMW iDrive 4 to iDrive 6 upgrade (NBT to NBT Evo) is a physical head unit replacement that brings a 10.25" widescreen display, fullscreen Apple CarPlay, Android Auto, and iDrive 6 software to older F-series BMWs. The swap uses OEM connectors and the new unit is coded to the vehicle VIN via ENET. Compatible with F-series models originally equipped with CIC or NBT (iDrive 4/5).
BMW NBT Evo iDrive 4 to iDrive 6 Update with Full Screen CarPlay. Remote firmware flash upgrades your NBT Evo from the old iDrive 4/5 interface to modern iDrive 6 with tile-based menus, lifetime Apple CarPlay, fullscreen mode, screen mirroring, and Video in Motion. 30-minute remote session. $359 USD at M-TRI UPGRADE.
Does any of this sound familiar?
- Your NBT Evo screen shows a tiny CarPlay window in the corner and you have to squint to read directions while driving?
- You bought your BMW pre-2018 and it has the NBT Evo head unit but none of the newer iDrive 6 software features your friend's F30 has?
- Your dealer quoted you over $1,000 to update the iDrive software and still wouldn't guarantee full-screen CarPlay?
- You're running iDrive 4 and watching YouTube videos of iDrive 6 wondering why BMW never pushed the update to your car?
- Wireless CarPlay isn't supported on your current setup and you're tired of plugging in every single time?
- You've tried the free map update route and realised the interface itself hasn't changed — it's still the old layout?
BMW NBT EVO Full-Screen CarPlay + 360 Panoramic Upgrade Module
A two-in-one upgrade module for BMW vehicles running the NBT EVO head unit. Activates factory full-screen Apple CarPlay and adds a true 360-degree panoramic imaging system - with real-time front/side/rear view, 3D radar scanning, and night-vision assist - all displayed on the original car screen.
Module Functions
- Original Car Screen Upgrade - BMW CarPlay - activates factory full-screen Apple CarPlay, Android Auto, and HiCar on the original iDrive display
-
360° Panoramic Imaging System - adds surround-view cameras with:
- Safe driving support
- Baidu / Amap map support with precise online navigation
- 360° driving recording (DVR) with real-time display on the factory screen
- 3D radar scanning with 1080p no-blind-spot imaging
- Night-vision assist
- Panoramic bird's-eye imaging
- Voice Control Assistant - voice-activate Siri to control calls while driving, hands-free dialling
Vehicle Fitment
BMW vehicles equipped with the NBT EVO head unit (roughly iDrive 4 to iDrive 6 generation). Please supply your VIN and head-unit model before ordering so the module can be matched.
Key Features
- Non-destructive installation - plug-and-play, no wire cutting
- Voice Control built-in
- Factory direct sales - quality inspection report included
- Factory warranty
Installation
The module inserts between the factory head unit and the original loom. Includes a coding step to activate the full-screen CarPlay flag. Recommended to be installed by a workshop familiar with BMW NBT EVO service.
Frequently Asked Questions
My 2017 BMW has NBT EVO but the menu looks dated — can I get the modern look?
Yes. Many F-chassis NBT EVO units still ship with the older iDrive 4 UI. This service flashes them to the iDrive 6 interface (modern tile-based widget layout) — same hardware, fresh OS.
Will this also enable full-screen CarPlay?
Yes. The iDrive 6 update bundles the full-screen CarPlay activation, so your CarPlay sessions use the entire screen instead of being constrained to a windowed view.
Is this a hardware change or remote-only?
Remote only. We connect to your car via an OBD cable and remote desktop session, flash the head unit, and reboot. Total session ~30 minutes. No hardware leaves or arrives.
If I update my car later via dealer, will this be wiped?
BMW dealer software updates may revert UI to iDrive 4 in rare cases. If that happens we redo the flash for free within 12 months. Most users never see a regression.
Are there any new bugs or features lost going from iDrive 4 → 6?
No features lost. iDrive 6 actually adds: app integration, faster boot, improved nav rendering, customizable widgets, and full-screen CarPlay/Android Auto.
Related Guides
Share
Frequently Asked Questions
How does remote coding work?
After purchase we schedule a remote session. Connect an ENET cable to your BMW's OBD2 port, open TeamViewer, and we handle the rest — coding is complete in 15–60 minutes.
Is the coding reversible?
Yes — 100% reversible. We back up your original settings before any changes. You can restore to factory at any time.
Which BMW models are supported?
Most services support F-Series and G-Series BMWs. Exact compatibility is listed in each product. Contact us if unsure about your model.
What do I need?
You need: (1) an ENET OBD2-to-Ethernet cable, (2) a Windows laptop, (3) TeamViewer (free). We supply all coding software and guide you step-by-step.
How long does a session take?
Single features take 15–30 minutes. Full packages take up to 2 hours. Sessions run 7 days a week across NZ, AU, USA and Middle East time zones.