M-TRI UPGRADE
BMW SOS Emergency Call System Removal - Remote Coding
BMW SOS Emergency Call System Removal - Remote Coding
Couldn't load pickup availability
Quick Answer
BMW SOS emergency call system removal coding permanently suppresses eCall system warning messages on BMWs where the SOS module is present but no active SIM card is installed — common after import or market change. Remote ENET service, 20 minutes. Eliminates continuous SOS fault codes without removing any hardware.
BMW SOS Emergency Call System Removal via remote coding. Eliminates the annoying SOS malfunction warning on BMWs where the emergency call module has been disconnected or is faulty. 10-minute remote session. Works on F and G Series. $99 USD at M-TRI UPGRADE.
Does any of this sound familiar?
- Your BMW keeps showing an annoying SOS malfunction warning on the dashboard?
- The emergency call module (ATM/TCB) has failed and the dealer wants to charge a fortune to replace it?
- You imported your BMW and the SOS system does not work in your country — but the error message will not go away?
BMW SOS Emergency Call System Removal
Remote coding service to disable the SOS emergency call system and remove all related warning messages from your BMW dashboard and iDrive. No more persistent SOS malfunction warnings.
What You Get
- SOS warning removed from instrument cluster and iDrive
- No more check-control messages related to emergency call system
- No fault codes stored for ATM/TCB module
- Clean dashboard — no warning lights
Compatibility
- All F-Series (F10, F20, F25, F30, F80, etc.)
- All G-Series (G01, G05, G20, G30, G80, etc.)
How It Works
- Place your order and provide your VIN
- Connect via ENET cable
- Remote session — 15-20 minutes
- Warning cleared immediately
Vehicle Compatibility
| Series | F-Chassis | G-Chassis |
|---|---|---|
| 1 / 2 Series | F20, F21, F22, F23, F87 | F40, F44 |
| 3 / 4 Series | F30, F31, F32, F33, F34, F36, F80, F82 | G20, G21, G22, G23, G26, G80, G82 |
| 5 / 6 Series | F10, F11, F06, F12, F13 | G30, G31, G32 |
| 7 Series | F01, F02 | G11, G12 |
| X-Series | F25, F26, F15, F16, F48, F39 | G01, G02, G05, G06, G07 |
Learn More
Related Guides
Share
Frequently Asked Questions
How does remote coding work?
After purchase we schedule a remote session. Connect an ENET cable to your BMW's OBD2 port, open TeamViewer, and we handle the rest — coding is complete in 15–60 minutes.
Is the coding reversible?
Yes — 100% reversible. We back up your original settings before any changes. You can restore to factory at any time.
Which BMW models are supported?
Most services support F-Series and G-Series BMWs. Exact compatibility is listed in each product. Contact us if unsure about your model.
What do I need?
You need: (1) an ENET OBD2-to-Ethernet cable, (2) a Windows laptop, (3) TeamViewer (free). We supply all coding software and guide you step-by-step.
How long does a session take?
Single features take 15–30 minutes. Full packages take up to 2 hours. Sessions run 7 days a week across NZ, AU, USA and Middle East time zones.