M-TRI UPGRADE
OEM BMW M3 Instrument Cluster for 3 and 4 Series
OEM BMW M3 Instrument Cluster for 3 and 4 Series
Couldn't load pickup availability
OEM BMW M3 Instrument Cluster for 3 and 4 Series. Genuine BMW M3 digital instrument cluster retrofit for G20 3 Series and G22 4 Series. Features M-specific gauges, shift lights, and M View display. Plug-and-play with coding activation included. M-TRI UPGRADE, worldwide shipping.
Sound familiar?
- You bought your F30 or F32 used and it came with the base cluster — no M badge, a 260 km/h speedo that feels out of place in a sport sedan.
- Your dealer quoted you well over $2,000 to source and code an M3 cluster. You know the part exists, you just can't justify that price.
- You've seen the 330 km/h speedometer and 8000 RPM tacho in other F30s and can't un-see how good it looks.
- You're doing an M3 or M4 interior conversion and the stock cluster is the one thing breaking the illusion.
- You ordered a cluster online before and it arrived uncoded — useless without a BMW ISTA setup and a dealer visit that cost more than the part.
- You want it done right: genuine BMW, not a replica face swap or a cluster pulled from a write-off with no history.
OEM BMW M3 Instrument Cluster for 3 and 4 Series (F30 / F32)
A genuine BMW M3-spec digital instrument cluster - with the unmistakable 330 km/h speedometer, 8000 RPM tachometer, and M badge - that retrofits directly into F30 3 Series and F32 4 Series vehicles. Supplied with the adapter harness and ready for installation.
Vehicle Fitment
- BMW 3 Series F30 / F31 / F34 (2012-2019)
- BMW 4 Series F32 / F33 / F36 (2013-2020)
Please supply your VIN before ordering so the cluster can be correctly pre-coded and mileage-matched.
What You Get
- M-badged centerpiece - the factory M logo between the dials
- 330 km/h speedometer face with M-style red needles
- 8000 RPM M tachometer with shift indicator
- Oil-temperature gauge - factory M readout instead of the base fuel-economy display
- Full factory iDrive integration - warnings, mileage, driving mode display all retained
What's Included
- 1 x Genuine BMW M3-spec instrument cluster
- 1 x Adapter wiring harness
- VIN-matched coding before shipment
Installation
The cluster is a direct-fit replacement for the original F30 / F32 cluster. Installation requires unplugging the factory cluster and slotting in the M cluster via the adapter harness. Mileage is synchronized to the vehicle during coding.
Note
This is a genuine BMW OEM M-spec cluster, not an aftermarket LCD emulator. The dials are physical and the display is the original BMW TFT panel between the gauges.
Frequently Asked Questions
My F30 has the basic black-and-white cluster. Can I upgrade to the M-style digital one?
Yes — this is the genuine BMW M3 / M4 (F80/F82) instrument cluster, fully compatible with F30 320i/328i/335i and F32 428i/435i. It brings the digital tachometer, M Sport graphics, configurable displays, and full-color readouts to your standard F-chassis.
Is this real OEM or aftermarket replica?
Genuine BMW OEM cluster — same exact part fitted to F80 M3 / F82 M4 from factory. Pulled from low-mileage donor cars, fully tested, with warranty.
Will all my factory functions still work — speedo, fuel gauge, tach?
Yes. Cluster reads CAN bus normally — speedometer, fuel level, coolant temp, range/MPG, all displayed correctly via standard signals. Just with the upgraded M-style graphics.
Does it require coding to work?
Yes — VIN coding to your specific car so it reads your engine type and transmission correctly. We include remote coding service in the price — ship the unit, we code remotely once you've installed.
Will this trigger 'incorrect part' fault codes?
Not after coding. Pre-coding it will throw a few warnings on first install (5-10 minutes). After remote VIN coding, all warnings clear and cluster integrates seamlessly.
